T-Shirt Forums banner
1 - 20 of 39 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter · #1 ·
Hello mga kabayan!

im having trouble with my craft robo :(

after printing out the registration marks, minsan hindi niya nababasa, minsan ayaw niya na sa 3rd registration mark, haayy nawawalan na ako ng gana, gusto ko ng itapon ito! pero sayang naman 20k+ ko dito nakakainis grabeee
 

·
Registered
Joined
·
1,928 Posts
Sir yung reg mark kung minsan kasi tabingi yung pagkalagay ng papel kaya sa 3rd mark hnd mabasa. Ganyan lang talaga kung umpisa ganyan din dati ako sa craftrobo pro ko. Isa pang tip kung tnadaan mo yung pwesto lagi yung tip blade position sa bawat eksakto basa ng reg mark , kung minsan kasi pag nakuha mo yung tamang pwesto ng blade madali lang yung pag basa ng reg mark kaya trial and error pag nakita mo na lagi doon sa pwesto ay lagi tama yung cut o nababasa yung reg mark doon mo na lagi ilagay yung tip ng blade.
 

·
Registered
Joined
·
1,237 Posts
sir roq anu po ba ang magandang brand ng cutter na available dito sa pinas na pupwede sa vynil sticker at heat press paper.

as between stika and craft robo, merun din ata ang mimaki. sa pagkaalam nyo po alin ang mas maganda
 

·
Registered
Joined
·
1,928 Posts
Sir may kasabihan nga na mas malaki mas maganda :D , Pero sa tingin ko basic ay 15-24 depende sa market mo. May mga china graphtec na peke nakalagay lang graphtec. Kung basic cutting lang try nyo yung mga china na cutter na 24 pataas ang size,ok na yun bastat marunong kyo sa mga vector art software. sa Pinas pala mayroon GCC 24 expert na cutter distributor mas ok yun.
 

·
Registered
Joined
·
1,928 Posts
Sir yung graphtec na china na halagang 20T+ ay parang peke, unag una yung ARMS nila ay iba ang meaning. Halos lahat ng graphtec may contour cutting capability khit nga yung small crafrobo nila mayroon. Pero yang graphtec china wla, mas maganda rin is serach nyo sa site ng graphtec. YUng redsail, grphtec peke at iba pang china cutter wla siya contour cutting gamit nila ay yung laser point allignment. Ibang iba ito sa contour cut ng mga roland, graphtec. KUng lagi ka gagawa ng contour cutting mas maganda kung bibili ka ng GX24 ng roland or craftrobo pro or bigger size depende sa product siae na balak mo e cut.
 

·
Registered
Joined
·
129 Posts
Yung Craftrobo namin pinadala lang namin from US. $290 dollars ata plus fee pa sa customs. Uwi siyang around 17k-18k @45 pesos sa dollars. It took 2 to 3 weeks para maship sa Pinas.

Sulit na. Kesa bili pa ng China made na Craft Robo. Have one shipped sa inyo.

P.S. Nagpatulong lang ako sa Lolo ko sa US. ^_^
 

·
Registered
Joined
·
24 Posts
sir@MYDAMIT ung craftrobo po sa teestudio ay hindi po ba china made....

may plan po kasi ako bumili ng cutter may nakita ako sa print and label exhibit sa smx worth 20k a3 size...

may i ask kung pano ko malalaman na original kung craftrobo cutter na binili ko? any physical distinction...

salamat
 

·
Registered
Joined
·
1,928 Posts

·
Registered
Joined
·
24 Posts
sir roq ung craftrobo a4 size sa teestudio magkano po ba? wala po bang discount... hehehe.. hindi po ba cya mahirap gamitin... marami po kasi ako nainquire na cutter pero most of them china, taiwan or japan.. namimili po kasi ako between craftrobo or redsail... most contour po gagamitin ko sa transfer paper...
 

·
Registered
Joined
·
1,928 Posts
Hnd siya mahirap gamitin kung sanay kayo sa illustrator or any vector art software. kung contour cutting hanap nyo ibang iba contour cutting ng craftrobo pro kaysa sa redsail. Kung may budget naman go for craftrobo pro or gx24 roland.
 

·
Registered
Joined
·
9,534 Posts
Sa tingin ko, yung grahtec china or china grahtec ay liyu plotter/cutter. Specifically yungs LIYU SC 631-E 24 ang sinasabing china Graphtec CE-1000-60. Sino kaya ang familiar sa dalawang models na ito?

From my experience in selling China products, and the same was told to me when I was in an HK trade show, the most important thing is knowing the product because you can actually buy original brands in China (and even HK) at the price of a fake. Yung tipong maganda at matibay na mura pa.

In my case, a friend imported a certain brand of rifle scopes and our retail price is P3600. A customer who makes PCP air rifles purchased one and came back to purchase all our stocks at [email protected] According to him, they're originals and has a market value of P12-15k. He sold it to his PCP customers for P9,000. I am guessing they're export overruns.

Some china products are also the real thing with some parts replaced with cheaper alternatives.

I have also sold china products, and china brand, that cost only 25% of a famous Japanese brand and the china brand outlast the Japanese brand. Our gunsmith in pampamga has tested and used them time and again and the china brand last longer. Too good to be true sometimes they are true.

But china graphtec could simply mean that the plotter/cutter is a copy or clone of graphtec.

What I am trying to say is that maybe someone familiar with or has used both plotters can give an educated thought.
 
1 - 20 of 39 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top