T-Shirt Forums banner

Corel Fonts skewed

2K views 5 replies 2 participants last post by  Fluid 
#1 ·
When I create lettering above or below an image and then preview it on my Epson 88, the letters are not aligned. I can't figure out why.

Dean
 
#3 ·
Richard:

That was just the answer I needed.

When I preview my lettering in the print preview screen, the letters are either out of sequence or spaced differently than orginally laid out. This appears with no matter which printer I choose. Now I've yet to try and print, but I can't imagine if it would print correctly.

Thanks again for your help.

Dean
 
#5 · (Edited)
I'm using Version 11
I made some observations.

The problem IS in the print preview, but only while using the mirror image.

When printing in mirror image- the print is normal.
When previewing- it is not - despite my reading it backwards.

When I don't have the mirror selected- its normal
and the printing is normal.

I only printed to an image file (paperport) and not to paper, but I think the results will be the same.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top