T-Shirt Forums banner
1 - 7 of 7 Posts

· Registered
Joined
·
468 Posts
Discussion Starter · #1 ·
I use to print ok, after a Power Outage start problems with the colors
I attach an image the RH was printed with the NeoSolvent and LH with Textil in Production mode, same image, both printed on paper
I have a good nozzle check
I reload NeoRip and install a new one received from AA, but still have the issue
Any comments are welcome!!!!!
 

Attachments

· Registered
Joined
·
468 Posts
Discussion Starter · #3 ·
Yeah very strange, I tried different files most .psd files.
Today I going to swap the motherboard with the solvent printer.
And works or not, I going to celebrate with a beer
 

· Registered
Joined
·
468 Posts
Discussion Starter · #4 ·
Replace the mother board and the problem seems to be the same, good nozzle check, bad print.

But, just before start writing y remove the carriage just to check and reinstall, not open or dissambly, restart my computer, and voila!!!!
Machine start printing as usual again, OMG
a week with the machine down and suddenly it starts again,
I m happy, any way have no idea what happened to the machine
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top