T-Shirt Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
543 Posts
These might help:

1. Clean and re-grease the carriage shafts. The grease is a very specific weight, so find the right stuff or a close match.

2. Replace the felts cleaning the rail for the carriage wheels, or just take these of entirely. These are on the rail closest to you when you open the lid of the printer, they're on little metal fenders going over the wheels. It really won't hurt much to remove the fenders and felts entirely, but you'll need to be judicious about cleaning the rail. But, first just try replacing the felts.

3. Clean the encoder strip and perform a CR Speed adjustment.
 
1 - 1 of 1 Posts
Top