[ReelHard]

Hey all
I tried first CMYK print. FIRST!!! I know registration is off so know that is biggest problem but question is.
I used IC profiles with Corel. It generated:
C 60lpi, 15 degrees
M 60lpi, 75 degress
Y 60lpi, 0 degress
K 60lpi, 45 degress.
My films seemed light using goshtscripts and epson 1100 and the water splash just wouldn't burn.
Also it seems very light on shirt. I used 305 screens.
The second pic is original artwork. Any sugestions to get it right ( besides re-register ) and the colors to "pop" on the shirt.
Thanks!!

 

[sben763]

Is there no under base under the fish. CMYK are translucent inks and really require an under base on anything but white. I even under base white so that when I do the same shirt on a color the print stay consistent. Personally I would reduce the LPI to 50-55 and the lower the mesh the more ink that will be put down. So using 230-280 will allow more ink to be put down.

Here is a CMYK with a underbase with IC pro brite.