T-Shirt Forums banner
1 - 5 of 5 Posts

· Registered
Joined
·
16 Posts
I would assume the CMYK is the same as any other printer. There may be a small additive change for binding but would have to ask your ink manufacturer. I usually shake all my bags of ink CMYK and White. Im sure you could put cleaning cartridges in also. Im still fairly new but willing to share what miniscule amount I have learned.
 

· Registered
Joined
·
16 Posts
Topdog sounds right. I purchased two Spectra 600's and the spray coater. I have not had a problem with the white ink.......Yet (knock on wood twice to un-jinx myself). I use syringe to clean the capping station upon shutdown and put my waste ink bottle higher than waste tube to keep cap station wet. I also soak the print head nightly. Should be a video on internet by Spectra showing the process. Don't want to hammer your post so if you have any questions and I am able to answer I will.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top