T-Shirt Forums banner
1 - 3 of 3 Posts

· Registered
Joined
·
74 Posts
Discussion Starter · #1 ·
Hello Everyone,
Has someone had experience how to unblock white ink supply from capping station?

It does not suck white ink as white ink pipes are probably blocked. To test it I put some cleaning solution on white ink plate on the capping station. Then I rotated a pump using screwdriver clockwise. Liquid does not move to waste ink container and remains on the plate.

I checked all the white ink tubes that go from capping station. They are fine. It is probably black tube inside capping station which is blocked. Is it possible to replace it without removing capping station?
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top