Has anyone ever printed on a white woven inner label with JPSS paper or know if it is possible. I would try but i have been away from my heat press all week and i really need to make an order tommorrow for some stock but only on the basis i can print over a woven label...
I am basically printing a large number of caps but i really am not keen on the branding of the inside label! The caps are amazing but i don't like the inner logo and this will definiately affect sales...I cut the label away carefully and found it had a backing part also stiched behind it where the label looped...but i didn't cut this away so by cutting the front as cleanly as possble its quite hard to tell that a label was removed! However with a totally blank label on the other side, this also looks slightly out of place and i wanted to print my own logo onto it just for the sake of not leaving it blank...i think it might look quite effective if it works!!!
Do JPSS white transfers apply to this kind of material if the woven label was white? I'm really intruiged to know...if so i can go ahead and place my order on the caps asap.
thanks for any help!