T-Shirt Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
This question is for anyone that has a Bridge cutter or knows of their capabilities. Josh may be my best bet here...

25" Bridge cutter, I have 45 / 60 degree blades, can I cut your pressure sensitive twill with this machine?

Does the PolyTwill from imprintables have the sticky/plastic backing on the twill to make plotter cutting easier? I know it needs sealing/stitching to the material.

Never cut twill but would love to give it a shot!

One more question... Will ECO-Film work to overlap the edges on twill, or only something stronger like Cut or CUT II??

Thanks!

Josh from imprintables help, so I can spend some monies!! :D
 

·
Registered
Joined
·
2,645 Posts
Does the PolyTwill from imprintables have the sticky/plastic backing on the twill to make plotter cutting easier? I know it needs sealing/stitching to the material.

Never cut twill but would love to give it a shot!

One more question... Will ECO-Film work to overlap the edges on twill, or only something stronger like Cut or CUT II??
Yes, the PolyTwill from Imprintables has a pressure sensitive backing. Eco film will work for overlapping the edges, I believe Josh recommends at least a .25 overlap.
 
1 - 3 of 3 Posts
Top