T-Shirt Forums banner

Best way to print on reversible mesh!

655 Views 1 Reply 2 Participants Last post by  gardenhillemb
Quick question. I have 25 red/white reversible mesh(100% Poly) to print school name and number on both sides. Im thinking the best way would be with Siser Easy weed. Whats opinions? I have option of screenprinting but feel like Im going to have a mess with all the mesh holes. Im new to this and first time for this type of shirt.
1 - 2 of 2 Posts
You can do it with vinyl but make sure you have a teflon pillow inside so the adhesive doesn't stick to the reverse side. If you screenprint, put a piece of transfer paper inside to keep the ink from coming through then pull the paper out and run it through your dryer so you can reuse it.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.