[cryptkeeper]

I placed an order for samples from my supplier over 2 weeks ago, and they are taking too long to come in. My deadline is fast approaching, so I need to actually place an order without testing first.

What is the best siser heat transfer material for a vc540sp, and anything I should know about them? I was told the colorprint ii needs to cure for 4-6 hours. Does this mean I cannot press it till 4-6 hours after printing? Is the colorprint extra better?

I'm getting 15x10y for 86cdn is the extra worth it for 113cdn?

Sent from my R800a using Tapatalk

 

[cryptkeeper]

Well I placed an order for colorprint ii. Will see how good it is.

Sent from my R800a using Tapatalk

 

[cryptkeeper]

Well, I really don't like this material. It holds the color well, but it feels very heavy and while cutting, the blade lifts the edges, so when I weed, it lifts the design off. Smaller areas lift of with the cutter too! I tried with 60gsm to 90 gsm in 5gsm increments. 75 worked best, but it's still a pain to weed!

Sent from my R800a using Tapatalk