Barudan LEM Pro-II

Looks interesting. I am going to ISS Ft. Worth the end of this month and plan on talking to my Barudan rep about it.

Barudan

There is also software to do the job ( I think ). I dont use it but it could be an alternative idea.
Interesting to hear your thoughts if you buy one of these systems. I am getting a little fed up running between the machines with the CF card.
Earl

Earl Smith said:

Barudan

There is also software to do the job ( I think ). I dont use it but it could be an alternative idea.
Interesting to hear your thoughts if you buy one of these systems. I am getting a little fed up running between the machines with the CF card.
Earl

Click to expand...

this sounds interesting although it doesnt give the reports on production time, thread cuts, head problems, etc etc.

it says its free....do you know where I can download the software or where I can get it from?

Thanks for this info Earl.

I called barudan UK but they were least helpful

I´m in Germany and Barudan here know of this software and Sell a version of it. Apparently there are 2 or 3 levels.
Have you tried Barudan US? Show them the UK web site , maybe they can help.
I havent bought it because the software needs a com port on the computer for each machine. Means I have to buy a new computer. The switch could be better.
Earl.

oh didnt realise I need a computer for every machine....i'd need to buy 7 machines ha ha

think i'll stick to the LEM program where i can also check on productivity and monitor speeds and thread cuts and stop times etc etc...this helps especially during night shift when my staff tend to run it at high speed so they can get 2 hrs sleep at nite..... so its either this or put cameras which is another option...

Sorry , miss understood. You will need a com port on your computer for each machine. One computer , 7 com ports.
Stick with the LEM.
Earl