T-Shirt Forums banner

Banner Issues with double sided cut vinyl

1437 Views 4 Replies 3 Participants Last post by  royster13
we use Banners On A Roll, and the Front Side takes the cut vinyl nicely, sometimes an issue here and there with vinyl not sticking. We use Oracal 651 vinyl. The main trouble is the BACK of the banner. The cut lettering peels EASILY, falls off completely with the wind hitting it over a street.

We can't contact anyone today. Posting here on the off chance someone else has the same trouble, or knows a solution.
1 - 5 of 5 Posts
Most banner materials are not intended to be used on both sides...
I would wonder about contamination but since it's touching the front side when rolled up that's probably not it.

Give the back a good wipedown with 91% isopropyl alcohol on a very clean rag.
I;m finding that is the issue. what do we do for double sided? we are trying 3m Super 77 spray adhesive. this seem to work better, not confident 100%. Otherwise make 2 banners and attach to each othert?
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.