[tll9284]

i have made a design for a club in our area. i am going to try two types of printing on it to see which they like better. i have been doing some discharge printing and am really starting to love it, but i need some help with this lettering that i have done. the outline is white and the lettering is black. these will be going on lime green and black tee shirts. (pic 1)

1. should i print a white discharge for the outline of the lettering (so it would look like solid lettering, not like an outline look at pic 2)

2. should i print just the outline (pic 3)

3. should i discharge white then lay the black ink on top.

basically i need to know how you all would print this to look the best. and the easiest way to print it with great results.

this is not the whole design, just the lettering.

thanks so much!
Trish

 

[macmiller]

if you want just the outline to be white, then just print the outline on the black tees. Print the black butt-registered to the white on the lime. I'm not sure how well lime discharges, however.