i have some iron on transfers from micheal's and i'm wondering if i can use the iron on transfers on a heat press machine or would i have to only use the heat press transfers sold online....if i could would i use them the same way or is the time and temperature different for those?
are iron ons the same as heat press transfers?
1 - 3 of 3 Posts
Joined
·
5,412 Posts
Michael
You can probably use the store bought transfers on your heat press.
You can probably use the store bought transfers on your heat press.
Joined
·
5,540 Posts
you may have to do several tests before you figure out the right temperature..
try the lower temps first..
for the best results you should get heat press transfers, Pro World is a good place better quality and durability
With a heat press you will get a even heat coverage and faster application. There are several used ones here on the forums in the classified section or check Craigslist/eBay.
try the lower temps first..
for the best results you should get heat press transfers, Pro World is a good place better quality and durability
With a heat press you will get a even heat coverage and faster application. There are several used ones here on the forums in the classified section or check Craigslist/eBay.
1 - 3 of 3 Posts
