[nikkianni]

Hello,

I'm new to the forums and looking for some guidance. I typically print my transfers on 50/50 blend shirts but would like to start using 100% cotton.
When I try to apply transfers to the cotton tees, they don't peel well, bleed, etc. I'm applying at 385 degrees, 11 seconds with what I believe is medium pressure.
Any advice?

 

[proworlded]

Are these designs that you are producing?

 

[nikkianni]

No, they are ProWorld transfers. For instance, I just tried pressing a transfer onto a 60/40 blend and it was difficult to peel and the transfer didn't stick- at the bottom edge. (Came up spotty and torn looking).

 

[proworlded]

Could you please email us at service[USER=133086]@Pro[/USER]worldinc.com.