[wormil]

I'm planning on buying a cutter and it needs to be in a different room from my computer, actually about 40 feet away. Ideally I would like to use a wireless print server but if I have to, I can run ethernet cable.

I've read that at least one person has done it but most posts say it can't be done. Looking for some feedback if you have tried this and been either successful or unsuccessful.

 

[T-BOT]

Rick, the only thing Ive tryed was with a long cable and did not work. The cutter went cazy like.

I was involved with a project a few years ago where the customer would place an order with artwork online. Then it downloaded to a computer and converted to a cut file, then it was sent on the go anywhere to any other computer near a cutter.

...sorrry, thats all I can tell you.


: