T-Shirt Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
47 Posts
Try printing a full block of white at 30x40cm first, sometimes my first print of the day the white ink is thin despite the nozzle checks showing perfect lines, after I print a block of colors + white on transfer film (I was using dtf film) I noticed that the whites are thin on the top part and became thicker as the print goes on. I believe it was caused by either a semi coagulated white ink, or the whites on the print head got watery due to being in contact with the waste ink pad overnight (which contains cleaning solution from wet capping).
 
1 - 1 of 1 Posts
Top