T-Shirt Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
382 Posts
Discussion Starter · #1 ·
here is a 4 color spot color job i did. i expanded the yellow, red and green colors by 6 pixels for better registration. maybe should have only expanded 3 pixels. i flashed after every color. should i just have done wet on wet? printed this on 156 mesh and printed black last.
 

Attachments

·
Registered
Joined
·
3,184 Posts
Yeah. And generally areas that don't touch or overlap/trap. Inks can be detackified to minimize build up on the screen bottom.
And not with light ink on darks unless its Index or Simulated or such which can be flashed but generally not. Personally I very rarely do wet-on-wet. Platen rotates under flash as I print the next color. Doesn't slow production.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top