T-Shirt Forums banner
1 - 2 of 2 Posts

· Registered
99 Posts
Anyone have any experience with them on this?

As with most F&M products, bullet proof quality, but heavy hand and feel. They put a full layer of white behind every design so it is very thick. For large designs, it is very stiff especially on tshirts and worse if it is a large solid design with no negative space.

Pay attention to setting up colors in your design, must be CMYK color mode and check your percentages with a pantone chart, colors can come out very different than on the screen, big learning curve from just picking spot colors.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.