T-Shirt Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. Roland Vinyl Cutters
    Hi all, New to the community so appreciate any support. I recently purchased a BN20 for my football club, to print our new strips. I have faced issues with the printing media I've been using, which when pressed the white sections are see through when they shouldnt be. Please see attached...
  2. Vinyl Cutters (Plotters) and Transfers
    Is it possible to use blade to cut out contour of inkjet printed vinyl paper and transfer that onto a t-shirt?
  3. General T-Shirt Selling Discussion
    Hello everyone! I'm new to all of this, but basically I have a sublimation printer and a heat press. Still trying to figure out the best t shirt stock to use. As I am sure you are aware, I am limited to light/white t shirts. I haven't even started selling yet, so I am wondering if its worth...
  4. Roland Vinyl Cutters
    Hi all, I recently had trouble getting my Roland PC50 up and running and with some fantastic help from naattila I have been able to get loads of work done. Now, my question is. Since I am definitely not going to be using the print aspect of this cutter. Is there a possibility of detaching it...
  5. T shirt Printing Issues
    Hi, I am trying to use a vinyl cutter to do some heat press prints. I am having a lot of trouble with the sharpness of the lines and corners. I attached a photo and circles my issues in red. It's almost like the beginning of the cut and the end of the cut are not meeting up leaving a gap that...
  6. United Kingdom
    Hi all Newbie here, I'm using Hotflex from MDP and my cricut machine is catching on the letters. The cut lines are also not clean. I've attached pics. Have tried using the washi tape setting and increasing and decreasing the pressure but to no avail. Have also attached the image file at 200%...
  7. Heat Presses - Equipment
    Your precious suggestions required !! Do vinyl cutter blade brand names matter ??
  8. T-Shirt Articles
    Here is a quick screen capture tutorial on creating a two color name in CorelDRAW. This should be helpful for those of you cutting heat transfer vinyl:
1-8 of 8 Results