I was wondering if anyone can help with trying to figure out what I am doing wrong.
I am using a 500 Watt over head lamp at 18inches
My emulsion is Ulano orange photopolymer emulsion.
My design is solid black on transparent sheet
Black foam used under screen with clear glass over design.
good day. I am currently struggling with the burning process.
i am using a 120w floodlight with a side lamp stand.
i have been trying but i cnt seem to get the whole screen right. It burns on some ends and some ends the screen completely washes off.
What do i do? (Help😪😪)
What distance to i use...
I work for a facility that processes about 80 screens per day when we're busy. We haven't had much luck keeping our drains clear from the wash out booth. At least once a year our system backs up and we need to call in a plumber to bail us out.
What they flush out can only be described as a...
Long time user, first time poster. I run a medium sized print shop and order quarts of emulsion because of the shelf life. The one time I used a gallon of emulsion, I ended up throwing out half of it because of the shelf life expiring and I noticed it just wasn't working as well.
I have posted on this topic before some years ago, I believe. I have found some ways to cope with the problem, but never been able to solve it.
I have started using discharge inks about 5-6 years ago and have never looked back at plastisol inks. My only grief is the premature...
Emulsion keeps bubbling up. Could be because we have been trying to wash it out in the freezing cold? Shits fucked. This is what it looks like after we try to wash it out.
If anyone knows what the hell is the issue we would be very interested to hear.
I am a brand new screen printer. During my first two attempts i’ve experienced a few problems. The first attempt I had no problem with applying the emulsion. I had it shirt side faving down with a fan directed in it to dry and I left it for 12 hours. I then exposed my image with a UV light for 3...
Hi all, so I'm in need of some guidance,
so like the title says, I'm having exposure times issues,
as of right now I'm using ryonet WBP red. I've used the ecotex Tex red right before this due to needing emulsion ASAP, but Ryonet Red is what im used too.
Recently I've changed my exposure setup...
So i am using crycoat emulsion, & every time i expose after i wash out it starts to fade away.... I’m rinsing out in the shade
With a adjustable hose! & i let the screens dry with a fan in a dark room no light exposure.
the exposure unit is eight UV exposure printing tubes inside the...
Hey everyone! i'm new to this forum and hope someone can help me out!
I'm building an UV led exposure unit, and trying to figure out if one of these aliexpress lights would be a good fit for my box.
I'm not good with electricity :) so I would be grateful if someone could advise me on the links...
I'm having trouble exposing this LED emulsion. I tried a range from 5 seconds to 10 min with a 21step calculator to dial it in and the 5sec-15sec range seems to work better than longer times. But the top layer of the emulsion starts to break down and get stringy... like a very thin...
Hey Guys and Gals
I have been having a complete nightmare the last month. I have decided to attempt to get into t shirt screen printing. Starting with a simple one colour t shirt.
The issue is making the screen 😭. The screen I have is a 77T mesh and I am using Flat fox emulsion. I have made a...