T-Shirt Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 30 Results
  1. Direct To Film (DTF) Printing
    Having issues with specifically the colour red not feeling the areas it should be filling when printing. The red shapes or text always end up wobbly on the edges / with an outline not connected to the infill. But the patches missing aren’t consistent every time when printing the same logo...
    dtf
  2. T shirt Printing Issues
    Hi All ! We just placed an order for a DTF 600 system from DPI, with printer + dryer. I want to get some the best RIP on the market for this, we print a lot, and use hot folders, and automated software for must of our production. The printer will be delivered with WhiteRip8, i tried it at the...
  3. T shirt Printing Issues
    Good afternoon, I'm having problems with my DTF transfers not sticking in some places-- The only thing I have read is to peel it and then put it back under the heat press without the carrier sheet...but then it sticks to the heat press and distorts the transfer... I cannot find any info on this...
  4. General T-Shirt Selling Discussion
    Hello everyone, Thank you for reading my tread, I'm planning to set up my tshirt printing project using converted epson DTF, I already bought a domain and 90 gigabyte of designs for all of my niches, I'm worried about one thing, which is not having orders daily and I will have so much problems...
  5. Heat Press and Heat Transfers
    Hi everyone, I've been providing custom apparel decoration since 2017 to local small businesses and individuals in the Atlanta, GA area. I started off with my Cricut and HTV, then I added Transfer Express' heat transfer sheets to my print capabilities. Depending on volume and bandwidth (one...
  6. Direct To Film (DTF) Printing
    I replaced the damper, sucked the ink with a syringe and printed all the nozzles, but I am in trouble because the white ink does not come out in the middle. I don't know if the cause is the head or the ink path, please give me some good advice.
    dtf
  7. Epson SureColor DTG Printers
    Hi, Does anyone use any rip to print transfers (DTF) on the F2000? I've been using the garment but the issue of printing the color first and then the white is very unproductive!!! Does anyone have tips or recommendations? Thank you very much!! Greetings from Portugal!!
  8. Member Introductions
    Hi all! I`m "all in" and kind of over my head in this. Never printed on garment before and tried a few sublimation prints last year, before www convinced me that DTF is the thing. Got a massive printer solution from China w/powder machine and dryer and 200m of film to start with😂 ...except from...
  9. Direct To Film (DTF) Printing
    Our new Coldesi DTF printer had a film jam where the printer head got scrunched up with the film. The film was not sliding down correctly and when I went to move it the paper curled up within the printer head. We emergency stopped the machine but now the nozzle check is missing alot of the...
  10. TF Classifieds
    We have our demo 2 head Titan-Jet DTF printer and Shaker up for sale. I will post specs below. $15,000. This includes Flexirip rip software and PrintExp printer software. It has been a workhorse, used in daily commercial quality printing. We've upgraded to the latest model. It has 2 used Epson...
    $15,000 USD
  11. Direct To Film (DTF) Printing
    Hi! I'm new to the forums, and need some help (please and thanks). I have been a screen printer for 12 years, and recently developed rheumatoid arthritis on top of my already overused shoulders and wrists, so I need to transition away from manual printing and try something a little easier on the...
  12. Direct To Film (DTF) Printing
    Hello guys, im pretty new here so i just wanted to ask we want to buy DTF printer automatic line, and i was looking for STS_DTF Mutoh, Druma i-Transfer 600DT and DTF MAX 60 ... do you have any experiences with those printers? have any ideas for other printers which cost around 20k thanks for...
  13. General T-Shirt Selling Discussion
    Hi Guys I have been using HTV for the last 5 years and out source my printable vinyl. As want to add to my print collection but what's best for all round efficiency. I print half cotton, half polyester Should I buy screen printer print and cut machine DTG DTF White toner Or what is my...
  14. Direct To Film (DTF) Printing
    Hi everyone! I have this problem when I print my design (This case a logo from a client) the design looks just fine on the pet film but when I press for my first attempt it turns dark and purple as shown above but I did some digging and found out that I have to put 30% more cyan then magenta for...
  15. Direct To Film (DTF) Printing
    Lately, the acro rip 9.0.3 software is messing my artwork/logo (Made it myself its vector) up, for example I have this logo and its makes it thin when i print it on my L1800 (DTF) printer it comes out thin as well please HELPPPPPP I need to finish this order!!
  16. Direct To Film (DTF) Printing
    Hello I am very new and in the research stage of my tshirt business. Looking for the best type of printer to start with for heat transfers. I want to be able to print on any color of fabric and will most likely always use a blend cotton/poly shirt. Do both methods DTF and white toner printers...
  17. Direct To Film (DTF) Printing
    Hello! My prints are vivid and the colors are bright and even immediately after printing. I let the print set for 15min then I powder and cure for 5min at 315. After that I press onto the fabric 23 sec at 315. After pressing onto the fabric my image looks antique like or faded. I’ve set my ink...
  18. Direct To Film (DTF) Printing
    Hi there. I am printing with an Epson F2100, and the software Garment Creator to create DTF prints. I have tried all sorts of variations with the settings (adjusting saturation, brightness, etc...) to try and achieve bright blue prints. I have not been able to figure out what settings i should...
  19. Direct To Film (DTF) Printing
    Hi everyone. Have you seen such an issue with this printer. Nozzle check is perfect and the print head is brand new. The ink is the same I that I used the last 6 months. Any ideas?
  20. Direct To Film (DTF) Printing
    I have just converted my new Epson XP-15000 to DTF. I have previously used the L1800. When I print an image the white underbase is very wet and runs across the image. I used old settings in Acrorip 10.3 from my L1800 so white and colour are both 100% Will lowering the white to 50% or something...
1-20 of 30 Results
Top