T-Shirt Forums - View Single Post - [Brother GT-782] Extremely clogged nozzles on W4
Thread: [Brother GT-782] Extremely clogged nozzles on W4
View Single Post
Old August 24th, 2011 -   #2 (permalink)
DAGuide
TSF Veteran
Certified T-Shirt Junkie

DAGuide's Avatar
 
You can call me: Mark
Member Since: Oct 2006
Location: Orlando, FL
Posts: 4,664
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Thanks: 326
Thanked 1,637 Times in 1,101 Posts


Default Re: Extremely clogged nozzles on W4

Here would be my suggestions to help verify that the issue is isolated to the thread:
1. Put some of the maintenance fluid in the cap associated with that print head and see if it is sucked down when running a cleaning. This will help determine if the waste tube is clogged.
2. Move the print head to another location and run a Powerful cleaning to prime it. Then, print another nozzle check. Want to see if the same issue follows from one ink line / position to another. If not, then it might be something else (i.e. filter, ink line,..).
3. If the same results show up after moving the print head, manually clean the bottom of the print head using the swab and maintenance fluid.
4. If you see a different result, try replacing the filter.
5. Call Brother technical support to see if they have any other suggestions before you send the print head in for refurbishing.

Good luck and let us know what resolves the issue.

Mark
__________________
Mark E. Bagley, Esq. - GT Printer Accessories - www.garmenttools.com / Perfect Transfers - www.perfecttransfers.com
 
The Following User Says Thank You to DAGuide For This Useful Post:
VP Print (August 24th, 2011)