T-Shirt Forums

T-Shirt Forums (https://www.t-shirtforums.com/)
-   NeoFlex (https://www.t-shirtforums.com/neoflex/)
-   -   Neoflex One Hour Production Cycle - Nonstop Printing (https://www.t-shirtforums.com/neoflex/t193767.html)

VTG August 14th, 2012 06:54 PM

Re: Neoflex One Hour Production Cycle - Nonstop Printing
 
Quote:

Originally Posted by stevegamble (Post 1152207)
Most look at printer prodution, I am looking at curing production. Room comfort etc..

Steve, I would have thought that being in Canada would be a dream with respect to room comfort ... seems like you'd hardly need any AC in the summer (compared to other places down south) ... and the heat presses would actually warm the room up a bit in the winter (when you actually do need some heat).

Even with two NeoFlex printers, you could probably get by with two heat presses ... three presses should be more than enough to keep production flowing smoothly.

stevegamble August 14th, 2012 06:57 PM

Re: Neoflex One Hour Production Cycle - Nonstop Printing
 
Awesome news.. hope that works out well.

90% of customers pick the kornit shirt BECAUSE of non flat heat press feel.
I actually agree'd with them after.

Depends on customer and possibly artwork type?
Most all have heat press for pre treat already and many have two presses, one at Heavy pressure during production and one at light pressure.. and a work flow.

then I see Justin had 2 Neoflex and in smaller prints I could see himm benefiting from quicker curing or muliti drawer, especially if the drawers are auto off after timed cure, and bent to outside = more comfort in room like he uses.
Not a concern in the warehouse 20 foot ceiling type environment, but in the office type work space.
Anyway.. Sahara I believe will change things in the future of dtg.

stevegamble August 14th, 2012 07:02 PM

Re: Neoflex One Hour Production Cycle - Nonstop Printing
 
Quote:

Originally Posted by VTG (Post 1152213)
Steve, I would have thought that being in Canada would be a dream with respect to room comfort ... seems like you'd hardly need any AC in the summer (compared to other places down south) ... and the heat presses would actually warm the room up a bit in the winter (when you actually do need some heat).

Even with two NeoFlex printers, you could probably get by with two heat presses ... three presses should be more than enough to keep production flowing smoothly.


LOL.. joke right? in Canada we don't live in igloo's.
Last 60 days we have over 100F everyday, lawns are brown and many are dead from LONG heat waves, with HIGH humidity.
People come from Texas to visit and say it feels a LOT Hotter here in June.
We have 110F with HIGH humidity in summer and -40 in winter.
A/C cost $$ all summer and Heating cost $$ all winter.
Expensive place to live with energy bills.

Room gets too hot and our computers shut down, can hardly breath in here with AC full. just too humid.

Nymex August 15th, 2012 05:31 AM

Re: Neoflex One Hour Production Cycle - Nonstop Printing
 
Quote:

Originally Posted by stevegamble (Post 1152220)
LOL.. joke right? in Canada we don't live in igloo's.
Last 60 days we have over 100F everyday, lawns are brown and many are dead from LONG heat waves, with HIGH humidity.
People come from Texas to visit and say it feels a LOT Hotter here in June.
We have 110F with HIGH humidity in summer and -40 in winter.
A/C cost $$ all summer and Heating cost $$ all winter.
Expensive place to live with energy bills.

Room gets too hot and our computers shut down, can hardly breath in here with AC full. just too humid.


We go the same problem also in Canada. Our print room is away from the heatpress room. But we have a AC for hot day, propane gas heater for cool day, humidifier and dehumidifier!

allamerican-aeoon August 15th, 2012 06:34 AM

Re: Neoflex One Hour Production Cycle - Nonstop Printing
 
What is this? Canadian play ground? Which is we do not mind. I hope other countries will hop in too. So far, Canada and UK are very active. Happy about it. I just was in Montreal and it was hot and humid. My AC was running whole time. Maybe northen part is not but Ottawa and Quebec cities are not cooler. I enjoyed my visit but that French words make me lost few times. When my navi say some and trying to understand point I already passed exit. But was fun to meet NeoFamily. I know I have to upload pictures. No different than USA but language. Lol. Good beers too.
Sorry I missed you Ben.
Cheers! Beers are on me always.


All times are GMT -8. The time now is 01:49 PM.

vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright 2004-2014 T-ShirtForums.com. All rights reserved.