problems with 3G Jet-Opaque transfer paper - Page 4 - T-Shirt Forums
 

Hi, Unregistered. | Today's Posts

T-Shirt Forums
User Name
Password

Register Today For Free!

Forgot Your Password?





Site Navigation








+   T-Shirt Forums > T-Shirt Industry Information > Heat Press and Heat Transfers > Inkjet Heat Transfer Paper
Discuss the different inkjet transfer papers currently on the market.



problems with 3G Jet-Opaque transfer paper

Like Tree3Likes

 
Share This Thread Thread Tools
Old June 2nd, 2013 Jun 2, 2013 2:04:29 AM -   #46 (permalink)
T-Shirt Lover
T-Shirt Fan

LLTEES's Avatar
 
Member Since: Jun 2013
Posts: 20
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Thanks: 1
Thanked 0 Times in 0 Posts


Default Re: problems with 3G Jet-Opaque transfer paper

Quote:
Originally Posted by BroJames
You press
5 sec.with teflon on top of the shirt,
then press with teflon sheet again on top of shirt my temp/time is 165C/20 sec and
repress for 10 sec with again teflon.

I don't quite get it. Is the 5 second a pre-press without the transfer paper?

Your pressing time is too long. About 6 seconds would be enough for the main press. Thre is really no exact rules so you must find out what's best for you (in conjunction with your wash test) but 6 seconds should be close.

Is the shirt washed inside out or reversed? Did you scrub the image area?

My experience with my son's shirt is minor fading in 4-6 washes. Minor cracks occur about 10 washes. I did not monitor the washes but figures should be pretty close.
5 sec for that moisture thing i think..6 sec for 160 c temp for the main press?ur saying with the transfer paper po..
i washed it inside out using washing machine,i forgot to say that the design i press with 3g is on the back coz there is an design(screen printed i think)on the front with the same size.do you think thats the reason why it fades the two designs,and also it has wrinkles on the faded area..thanks
 
Sponsored Links
Advertisement
 
Old June 2nd, 2013 Jun 2, 2013 3:44:56 PM -   #47 (permalink)
T-Shirt Lover
T-Shirt Fan

Larry B's Avatar
 
You can call me: Larry
Member Since: Sep 2010
Posts: 26
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Thanks: 0
Thanked 2 Times in 2 Posts


Default Re: problems with 3G Jet-Opaque transfer paper

3G Jet Opaque is pressed for 30 seconds at 350 F.
 
Old December 1st, 2013 Dec 1, 2013 5:24:04 PM -   #48 (permalink)
Forum Member
Be nice, this is my first post :)

bryl's Avatar
 
Member Since: Dec 2013
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Thanks: 0
Thanked 0 Times in 0 Posts


Default Re: problems with 3G Jet-Opaque transfer paper

Hi! I am planning to make our personalized shirts for me and my girlfriend. We both love to jog so I decided to use a dri-fit shirt. Can I use 3G Opaque for dri-fit material?
 
 
Old March 1st, 2014 Mar 1, 2014 8:59:09 AM -   #49 (permalink)
Forum Member
Be nice, this is my first post :)

blknwht's Avatar
 
You can call me: Tom
Member Since: Mar 2014
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Thanks: 0
Thanked 0 Times in 0 Posts


Default Re: problems with 3G Jet-Opaque transfer paper

Quote:
Originally Posted by Djaxx
I'm from Philippines also.. and i also use 3g Opaque at 175c & 10secs.. im 6mos at the business & at the said temp&time i never experienced a failure on ths transfer paper..

btw, i might be on a wrong thread but can you guys watch this video (How to start your own t-shirt business - YouTube) & if you notice the transfer paper he used at the black shirt, it's a like a self weeding but the guy on the video did not mention the name or the brand of that paper, did anyone here tried that paper before?
bro, tom frm san juan city.. im using 3g opaque jet pro.. talaga bang aftr 1 wash mejo nag fefade na ang image,, thanks
 
Old March 1st, 2014 Mar 1, 2014 10:18:22 AM -   #50 (permalink)
TSF Veteran
Certified T-Shirt Junkie

Lnfortun's Avatar
 
You can call me: Luis
Member Since: Feb 2006
Location: Nebraska
Posts: 4,734
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Thanks: 323
Thanked 1,128 Times in 835 Posts


Default Re: problems with 3G Jet-Opaque transfer paper

The guy said the transfers with made with screen print process.
__________________
Luis CorelDRAW macro author
Macro Website
 
Old August 21st, 2014 Aug 21, 2014 3:57:45 PM -   #51 (permalink)
Forum Member
Be nice, this is my first post :)

Connie42's Avatar
 
You can call me: Connie E
Member Since: Apr 2014
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Thanks: 0
Thanked 0 Times in 0 Posts


Default Re: problems with 3G Jet-Opaque transfer paper

Anyone ever had problems with the paper backing not coming off? I have printed three sheets today and the area that is printed will not let go of the backing. so frustrated, everything else comes off fine, I print and use my plotter to cut out the image, no matter what I do I can not get the paper to release, I have had to take if off tiny pieces at a time. therefor I can not use the image to press. I have had to throw it in the trash, I am using Neenah Jet-Opaque ll Dark Transfer Paper.

Last edited by Connie42; August 21st, 2014 at 04:00 PM.. Reason: I forgot to add a note.
 
Old June 16th, 2015 Jun 16, 2015 12:31:56 AM -   #52 (permalink)
Forum Member
T-Shirt Member

ropster's Avatar
 
Member Since: Jun 2015
Posts: 11
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Thanks: 3
Thanked 0 Times in 0 Posts


Default Re: problems with 3G Jet-Opaque transfer paper

Quote:
Originally Posted by Connie42
Anyone ever had problems with the paper backing not coming off? I have printed three sheets today and the area that is printed will not let go of the backing. so frustrated, everything else comes off fine, I print and use my plotter to cut out the image, no matter what I do I can not get the paper to release, I have had to take if off tiny pieces at a time. therefor I can not use the image to press. I have had to throw it in the trash, I am using Neenah Jet-Opaque ll Dark Transfer Paper.
I had this problem, and the reason was I was cutting to deep, cutting into the backing which made it difficult to remove. the cut is very shallow for this material
 
Old January 29th, 2016 Jan 29, 2016 10:23:24 PM -   #53 (permalink)
Forum Member
T-Shirt Apprentice

Blueprint11's Avatar
 
Member Since: Jan 2016
Posts: 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Thanks: 0
Thanked 0 Times in 0 Posts


Default Re: problems with 3G Jet-Opaque transfer paper

I'm a newbie too, from the Philippines, to all the Filipinos here in the forums, what brand of shirts you used for commercial use of course and what setting of the heat press for 3G opaque for Dark and Jetpro for light transfer. By the way We have the Max RILEY heat press I think. Thank you.
 
Old April 11th, 2016 Apr 11, 2016 7:59:26 PM -   #54 (permalink)
Forum Member
T-Shirt Apprentice

lkzndrkrzz's Avatar
 
You can call me: Alekz
Member Since: Apr 2016
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Thanks: 0
Thanked 0 Times in 0 Posts


Default Re: problems with 3G Jet-Opaque transfer paper

Hi. I'm from Philippines and I wanna start my t shirt printing business . So, I bought this 3g jet opaque dark transfer paper. I watched on Youtube that transfer papers can be transferred using an iron instead of a heat press. I tried it on a shirt and the print was transferred but when I hand-washed the t shirt, the print was like crumpled and distorted. What do I need to now when washing my shirts? or should it really be a heat press that I should use???
 
Old August 2nd, 2016 Aug 2, 2016 7:43:18 PM -   #55 (permalink)
Forum Member
T-Shirt Apprentice

truongpm's Avatar
 
You can call me: Truong
Member Since: Aug 2016
Posts: 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Thanks: 1
Thanked 0 Times in 0 Posts


Default Re: problems with 3G Jet-Opaque transfer paper

Quote:
Originally Posted by hotmama
Hi! A newbie here from the Philippines.
May I know the factors that would cause the peeling off of images, printed on 3G Jet-Opaque, after several washing of the shirt.
I followed my supplier's instructions: for dark transfer, use 130C for 15 secs. I also stretch the shirt before and after pressing which I read on the threads here.
Any solution for my problem, pls... Thanks in advance
Hi. I'm a newbie and this thread very helpful for me. I have some question. Please help me please!
+ What kind of printer did you use?
+ Is 3G Jet-Opaque (for dark and light) had self-weeding property?
+ What kind of press machine did you use?
Thank in advance
 
Old June 20th, 2017 Jun 20, 2017 3:10:01 PM -   #56 (permalink)
Forum Member
T-Shirt Apprentice

ramonchin83's Avatar
 
Member Since: Apr 2015
Posts: 9
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Thanks: 1
Thanked 0 Times in 0 Posts


Default Re: problems with 3G Jet-Opaque transfer paper

Can you use this paper with sublimation inks?
 
Old July 27th, 2017 Jul 27, 2017 3:04:06 AM -   #57 (permalink)
Forum Member
Be nice, this is my first post :)

 
You can call me: dcruzcreative
Member Since: Jul 2017
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Thanks: 0
Thanked 0 Times in 0 Posts


Default Re: problems with 3G Jet-Opaque transfer paper

Quote:
Originally Posted by hotmama
Hi! A newbie here from the Philippines.
May I know the factors that would cause the peeling off of images, printed on 3G Jet-Opaque, after several washing of the shirt.
I followed my supplier's instructions: for dark transfer, use 130C for 15 secs. I also stretch the shirt before and after pressing which I read on the threads here.
Any solution for my problem, pls... Thanks in advance



Hi i'm using 3g jet-opaque for about a year now and had no press failure on this brand. Here's how i prep my press..... I pre press my shirt for 15 sec to remove moisture then my press setting is as follows 160c for 20 sec... then let it cool then pre press again for another 15 sec.... it works every time...... hope this helps!
 
Old July 14th, 2018 Jul 14, 2018 5:47:08 PM -   #58 (permalink)
T-Shirt Lover
T-Shirt Fan

sefosdad's Avatar
 
You can call me: Yiries
Member Since: Feb 2012
Posts: 34
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Thanks: 23
Thanked 3 Times in 1 Post


Default Re: problems with 3G Jet-Opaque transfer paper

Hello,

The problem I am having is the backing paper sticking to the transfer. After printing and cutting with the Silhouette cameo, it becomes very difficult to peel and it leaves spots of paper sticking to the transfer ruining it.
Any suggestions as to what might be happening?

Thank you!
 
Old January 1st, 2019 Jan 1, 2019 6:07:51 PM -   #59 (permalink)
Forum Member
Be nice, this is my first post :)

iamsieggie's Avatar
 
Member Since: Dec 2018
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Thanks: 0
Thanked 0 Times in 0 Posts


Default Re: problems with 3G Jet-Opaque transfer paper

I know this may be an old thread, FWIW, let me share my experience on CVC (60%/40%) shirt. I used 3G Jetpro dark transfer at 160C for 15s at medium pressure. The shirt on the link has been washed for about 8 times (automatic washing machine) and I have not seen any peeling but a few crackings of the design.


I tested it yesterday on 100% cotton, but I will have yet to see if it will peel or not. I used the same settings.

Also from Philippines here, just started with the printing business Dec 2018.

Last edited by iamsieggie; January 1st, 2019 at 06:11 PM.. Reason: added link as attachment.
 






This is a discussion about problems with 3G Jet-Opaque transfer paper that was posted in the Inkjet Heat Transfer Paper section of the forums.

Quick Reply
Type Your Message Below:
Do NOT Post Self Promotional URLs, Advertisements, Sales Offers or Requests. It is against our Forum Guidelines.
Options

Register Now

In order to be able to post messages on the T-Shirt Forums, you must first register.


Please enter your desired user name, your email address and other required details in the form below.

Your username must be between 2 and 16 characters and contain only letters and numbers (no special characters like hyphens, *, ', ~, etc)
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.

A confirmation email will be sent to this address, so please make sure it is accurate and that your email software is set to allow emails from our domain: t-shirtforums.com (sometimes the confirmation email gets accidently filtered into Yahoo/AOL/Hotmail/Gmail spam folders)
.

You won't be able to post until your email address has been confirmed. We take your privacy very seriously. Feel free to review our Privacy Policy in a new window.
Email Address:
First Name
It's nice to be able to be on a "first name" basis with the people you talk to in a forum. This is a totally optional field; if you like being on a first name basis, please enter your first name below :)

Log-in


Thread Tools

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off
Trackbacks are On
Pingbacks are On
Refbacks are Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
can you guys help me with some reveiws or pros and cons on -ink flex, jet opaque, and blue grid, never used opaque transfer paper before??? sunra1081 Heat Press and Heat Transfers 0 July 18th, 2011 05:47 PM
laser1 opaque transfer problems!!! HELP QUICK PLEASE faygoman Printers and Inks for Inkjet and Laser Transfers 5 October 1st, 2010 02:50 PM
Jet Opaque 2 EZ102: Opaque transfer paper Ink Running James007 Inkjet Heat Transfer Paper 1 August 17th, 2010 09:53 AM
opaque transfer paper pinktshirt Heat Press and Heat Transfers 0 May 7th, 2008 01:29 PM
Opaque Transfer Problems!! SonnyBam Heat Press and Heat Transfers 0 April 25th, 2006 07:13 PM


All times are GMT -8. The time now is 04:27 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright 2004-2014 T-ShirtForums.com. All rights reserved.