T-Shirt Forums

T-Shirt Forums (https://www.t-shirtforums.com/)
-   GCC Brand Vinyl Cutters (https://www.t-shirtforums.com/gcc-brand-vinyl-cutters/)
-   -   Gcc expert ii error light indicator (https://www.t-shirtforums.com/gcc-brand-vinyl-cutters/t651682.html)

nunneca1 February 19th, 2016 10:18 PM

Gcc expert ii error light indicator
 
New machine, downloaded everything but I'm unable to do a cut test because the error light keeps flashing red?b What's wrong?

Blue92 February 20th, 2016 06:25 AM

Re: Gcc expert ii error light indicator
 
It would help if you describe the steps you go through before the error light comes on.

catwalkkittys March 10th, 2016 08:00 PM

Re: Gcc expert ii error light indicator
 
I just bought my gcc cutter and i have it all set up. i can't get it to test cut. i set the vinyl in the middle and set the rollers making sure they are within the white lines. but when i press origin and cut, the error light comes on and it won't do anything? What am i doing wrong.

Nick Horvath March 11th, 2016 06:17 AM

Re: Gcc expert ii error light indicator
 
1 Attachment(s)
Please see the attached error document.

bigskycreative June 16th, 2016 05:38 PM

Re: Gcc expert ii error light indicator
 
Sorry to butt in on your thread, but thanks for the error sheet Nick Horvath.... so, what causes the GCC Expert 24 or 24LX to show "Graph was clipped"? I'm getting that message and I'm not sure why it's happening. Thanks....

freebird1963 June 16th, 2016 06:46 PM

Re: Gcc expert ii error light indicator
 
The clip error is cuz your page layout is not set right. The cutter thinks that the graphic is bigger than the media to be cut on.
Since the other didn't give which lights are blinking no way to help them.
In Corel
Go to Printer Setup choose the GCC driver/printer
Go to page layout and choose get from printer. Now it will normally be like 47inches by 23 inches. Change the 23 to however wide your vinyl is. I normally measure from one roller to the other.
Make sure you select your entire graphic and hit F12 and had a hair line to it. W/o it it won't cut either.

Good Luck

bigskycreative June 16th, 2016 08:28 PM

Re: Gcc expert ii error light indicator
 
Ok, I see what I did... one little bitty piece was making the design wider than the vinyl. Many thanks :)

gdyescas February 1st, 2020 10:09 AM

Re: Gcc expert ii error light indicator
 
Quote:

Originally Posted by Nick Horvath (Post 3555233)
Please see the attached error document.

Hi, how i can fix it if is the media, drum or motor?


All times are GMT -8. The time now is 07:53 AM.

vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright 2004-2014 T-ShirtForums.com. All rights reserved.