T-Shirt Forums

T-Shirt Forums (https://www.t-shirtforums.com/)
-   Epson SureColor DTG Printers (https://www.t-shirtforums.com/epson-surecolor-dtg-printers/)
-   -   Physical size of the Epson DTG printer (https://www.t-shirtforums.com/epson-surecolor-dtg-printers/t308345.html)

Rodney January 21st, 2014 02:46 PM

Physical size of the Epson DTG printer
 
Just in case anybody else was wondering.

Here are the size specs for the Epson DTG printer just in case you want to see how it'll fit in your space :)

http://content.screencast.com/users/...1_15-44-31.png

equipmentzone1 January 21st, 2014 02:52 PM

Re: Physical size of the Epson DTG printer
 
Here's some more information. Because the printer rests on rubber feet, your table can be significantly smaller than the overall dimensions of the printer. But you still want it to be very sturdy.

http://www.equipmentzone.com/images/...pment_Zone.jpg

binki January 21st, 2014 04:40 PM

Re: Physical size of the Epson DTG printer
 
110 Attachment(s)
From what I remember at the show it was about the same size as a K2 but going the other way

equipmentzone January 22nd, 2014 06:32 AM

Re: Physical size of the Epson DTG printer
 
Quote:

Originally Posted by binki (Post 1744449)
From what I remember at the show it was about the same size as a K2 but going the other way


The Epson is actually larger then the Kiosk 1 and 2 printers. The Epson F2000 is 39 inches wide x 57 inches deep. The Kiosk is 26 inch wide x 39 inch deep.

_

treefox2118 January 22nd, 2014 06:45 AM

Re: Physical size of the Epson DTG printer
 
15 Attachment(s)
Every DTG printer company should have drawings exactly like this.

EricDeem January 22nd, 2014 07:17 AM

Re: Physical size of the Epson DTG printer
 
68 Attachment(s)
It's definitely a 4 person job to uncrate and position the printer. It's not so much that it's heavy as it is awkward to carry.

equipmentzone January 22nd, 2014 07:21 AM

Re: Physical size of the Epson DTG printer
 
Quote:

Originally Posted by Dekay317 (Post 1745993)
It's definitely a 4 person job to uncrate and position the printer. It's not so much that it's heavy as it is awkward to carry.


We managed to do it with 3 people at the Long Beach ISS show. There are handhold marks on the printer indicating where to hold it. It definitely is a multi-person job.

I can tell you that it was harder getting it back in the crate after the show then taking it out :)

_

EricDeem January 22nd, 2014 07:52 AM

Re: Physical size of the Epson DTG printer
 
68 Attachment(s)
3 would probably be the minimum. Interestingly I found it easier to get back into the crate then it was getting out the first time.

equipmentzone January 22nd, 2014 07:58 AM

Re: Physical size of the Epson DTG printer
 
One person lifting on each side. One person in the front.

You should only lift at the marked lift points. Epson warns again lifting at the black rear cover.

_

out da box January 22nd, 2014 12:33 PM

Re: Physical size of the Epson DTG printer
 
Hmmm. So they did jump in.

What is it, friction drive???

equipmentzone January 22nd, 2014 12:34 PM

Re: Physical size of the Epson DTG printer
 
Belt drive.

_


All times are GMT -8. The time now is 07:14 AM.

vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright 2004-2014 T-ShirtForums.com. All rights reserved.