Any ideas on what causes 100% channel blockage on a 2 week old printer/printhead, or things to try?
Before I switched over to a DTG inkset(image armor) in my p600, I ran a test print with the OEM ink and it printed beautifully - all CMYK working just fine.
I then ran several med/large cleanings to push out all the old ink, and tried another test print. This time, only the yellow and black printed.
Since then, I've done a few small/med/large cleanings but it hasn't helped.
I'm assuming air is somewhere in the system where it shouldn't be.
Before I switched over to a DTG inkset(image armor) in my p600, I ran a test print with the OEM ink and it printed beautifully - all CMYK working just fine.
I then ran several med/large cleanings to push out all the old ink, and tried another test print. This time, only the yellow and black printed.
Since then, I've done a few small/med/large cleanings but it hasn't helped.
I'm assuming air is somewhere in the system where it shouldn't be.