T-Shirt Forums

T-Shirt Forums (https://www.t-shirtforums.com/)
-   DIY DTG (https://www.t-shirtforums.com/diy-dtg/)
-   -   The Journey R1900 Build (https://www.t-shirtforums.com/diy-dtg/t145661.html)

DTFuqua March 7th, 2011 12:04 PM

Re: The Journey R1900 Build
 
Quote:

Originally Posted by drdeath19134 (Post 866921)
I just won one from ebay 149.99 plus 30 shipping working used!.

did you talk with the seller to be sure it had no clogged heads and was preped for shipping so it didn't get them while being shipped? Good luck with it.:D

drdeath19134 March 7th, 2011 01:22 PM

Re: The Journey R1900 Build
 
Quote:

Originally Posted by DTFuqua (Post 866937)
did you talk with the seller to be sure it had no clogged heads and was preped for shipping so it didn't get them while being shipped? Good luck with it.:D

They guarantee working tested.. If not going back plan on full test before i attempt tear down.

EVLIND March 8th, 2011 01:20 PM

Re: The Journey R1900 Build
 
Quote:

Originally Posted by drdeath19134 (Post 866921)
I just won one from ebay 149.99 plus 30 shipping working used!.

Nice DrDeath!

EVLIND March 8th, 2011 02:05 PM

Re: The Journey R1900 Build
 
3 Attachment(s)
Took a few days off started today with the sliders again.
cut down the L brackets to 24 inches with a hack saw.
The hack saw broke POS! Pulled out the big gun and cut right
through it. Squared up the box and inserted it back into the slides. I did not cut the .50 inch PE switch notch. I am waiting to get the guts of the printer on the base and set the PE swith later. Ordering the parts from SDP-SI.com today. Printer is going to be picked up this week just waiting on the guy from craigslist to get back to me from a email earlier in the day.

drdeath19134 March 8th, 2011 02:25 PM

Re: The Journey R1900 Build
 
Did you change the size of the base from 33 x 36 to 30 x 36 or size of the bays from 30 to 33 inch.? Thanks

EVLIND March 8th, 2011 02:25 PM

Re: The Journey R1900 Build
 
Quote:

Originally Posted by drdeath19134 (Post 866985)
Did you change the size of the base from 33 x 36 to 30 x 36 or size of the bays from 30 to 33 inch.? Thanks

No I left it 33x36 I imagine you can reduce it. I went with the base measurements for this build book. The next one I build I will know a lot more.

drdeath19134 March 8th, 2011 02:48 PM

Re: The Journey R1900 Build
 
Ok, was wondering. Thanks delayed mine a few days starting eow.

EVLIND March 8th, 2011 02:53 PM

Re: The Journey R1900 Build
 
Quote:

Originally Posted by drdeath19134 (Post 867809)
Ok, was wondering. Thanks delayed mine a few days starting eow.

I like to rush things with this im taking my time.

EVLIND March 8th, 2011 02:54 PM

Re: The Journey R1900 Build
 
Im waiting on a email from a TSF member. He said that he obtained a .312 pulley from a company. This was at the end of last year. I will find out if it was the correct one and post info once I get an email back.

EVLIND March 8th, 2011 10:01 PM

Re: The Journey R1900 Build
 
1 Attachment(s)
Well, got the printer today brand new! :D



Time spent 2 hours to go 15 miles in Los Angeles Traffic Rush
Hour

Cost $300

drdeath19134 March 9th, 2011 05:31 AM

Re: The Journey R1900 Build
 
Quote:

Originally Posted by EVLIND (Post 868054)
Well, got the printer today brand new! :D



Time spent 2 hours to go 15 miles in Los Angeles Traffic Rush
Hour

Cost $300

You going to test before tear down, and you gone to take pics of tear down and cuts.?

RanR March 9th, 2011 07:45 AM

Re: The Journey R1900 Build
 
Good buy - 300 dollars - I assume the UPC code has been removed so the first purchaser can get the rebate - and of course you do not care about the Epson Warranty - :)

EVLIND March 9th, 2011 09:20 AM

Re: The Journey R1900 Build
 
Quote:

Originally Posted by RanR (Post 868284)
Good buy - 300 dollars - I assume the UPC code has been removed so the first purchaser can get the rebate - and of course you do not care about the Epson Warranty - :)

No UPC code, unopened box. Warranty no to worried about I made a friend a few months ago and he sells ink and repairs printers. Small shop but he has extra print heads and he is working on getting me a ink bag system.

drdeath19134 March 9th, 2011 09:23 AM

Re: The Journey R1900 Build
 
Quote:

Originally Posted by EVLIND (Post 868343)
No UPC code, unopened box. Warranty no to worried about I made a friend a few months ago and he sells ink and repairs printers. Small shop but he has extra print heads and he is working on getting me a ink bag system.

Sounds like a good deal, i am on my way pick up roybi 10 inch table saw $40. off craigslist. i cant cut a straight line to sae my life.lol

EVLIND March 9th, 2011 07:40 PM

Re: The Journey R1900 Build
 
Quote:

Originally Posted by drdeath19134 (Post 868344)
Sounds like a good deal, i am on my way pick up roybi 10 inch table saw $40. off craigslist. i cant cut a straight line to sae my life.lol

My damn Dewalt battery was almost gone had to make a few cuts then put it back on the charger. I would make my measurements and line then cut a few. It worked out otherwise I would have cut the crap out of the wood.


All times are GMT -8. The time now is 04:09 PM.

vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright 2004-2014 T-ShirtForums.com. All rights reserved.