T-Shirt Forums

T-Shirt Forums (https://www.t-shirtforums.com/)
-   DIY DTG (https://www.t-shirtforums.com/diy-dtg/)
-   -   The Journey R1900 Build (https://www.t-shirtforums.com/diy-dtg/t145661.html)

drdeath19134 April 8th, 2011 12:45 PM

Re: The Journey R1900 Build
 
Quote:

Originally Posted by colorfinger (Post 888319)
Shipping will cost $50.00... Why don't they just throw it in the trash?

Bob ?;O)

Don't know or care I got as described on my desk. Could have packed a little better but what the hell it already broken

shirts456 April 8th, 2011 07:38 PM

Re: The Journey R1900 Build
 
Hey Guys, If you are looking for cork sheets, go to Autozone. They sell it. It's used for gasket material and comes in a roll. Ummm... Frank, I'm waiting patiently for the next video...

feclark April 8th, 2011 07:55 PM

Re: The Journey R1900 Build
 
200 miles away from the beast. Will be home sat night and do some work and tape. I better keep up or mythbusters will take my audience!
Quote:

Originally Posted by shirts456 (Post 888730)
Hey Guys, If you are looking for cork sheets, go to Autozone. They sell it. It's used for gasket material and comes in a roll. Ummm... Frank, I'm waiting patiently for the next video...


DTFuqua April 8th, 2011 08:32 PM

Re: The Journey R1900 Build
 
Hey Paul. Go to Lowes or Home Depot and get the cork shelf paper with the sticky backing. Pretty cheap and no messing with glues.

102557 April 8th, 2011 09:02 PM

Re: The Journey R1900 Build
 
Quote:

Originally Posted by DTFuqua (Post 888750)
Hey Paul. Go to Lowes or Home Depot and get the cork shelf paper with the sticky backing. Pretty cheap and no messing with glues.

doubt the self stick will stay on long term, running the printer constantly..;)

colorfinger April 8th, 2011 11:09 PM

Re: The Journey R1900 Build
 
Gorilla Glue! Trust nothing else... You'll just go bananas!!!

OK, late and getting giddy... g'nite all!

Bob ?;O)

EVLIND April 9th, 2011 02:27 PM

Re: The Journey R1900 Build
 
Wow awesome to see drdeath almost ready to go. I am back from Florida The Magic Kingdom for a week and was thinking about my machine most of the time. I will be building the adjustable platen to see if it was the size of the platen that threw it off during printing. I had someone but some aluminum 13x19. I will hopefully have some better news later tonight.

EVLIND April 11th, 2011 03:11 PM

Re: The Journey R1900 Build
 
2 Attachment(s)
Well, I jumped back into it today and finally got it running. I knew I was close and kept getting a error when I went to print. Come to find out it was the driver. I reinstalled the driver and did not expect the thing to print. I turned around and it was PRINTING! Thanks to German and Spider and all the others that helped with this project. I am on cloud 9 for now until I run into another problem. But, hey it was awesome to do something you were really gun shy in doing. Sorry this thread took a dump due to work and issues. I am ready to do it again with a compact model hopefully the V3 will be out soon to view. :):)

DTFuqua April 11th, 2011 04:48 PM

Re: The Journey R1900 Build
 
The monster energy didn't show any watermark. What did you print it with ? a RIP or the epson driver?

kenji815 July 13th, 2011 12:19 PM

Re: The Journey R1900 Build
 
awesome thread.. this make me want to get starting on building my own DTG printer.

EVLIND July 13th, 2011 02:57 PM

Re: The Journey R1900 Build
 
Quote:

Originally Posted by kenji815 (Post 945062)
awesome thread.. this make me want to get starting on building my own DTG printer.

Thanks,
I kind of lagged on it was busy with work. Check out German13 thread "license to thrill", Its a great thread and people are great there. Page 36 should be the plans for the V2 R1900. I built the thing and have not printed anything in awhile have been doing a bunch of screen printing.
any questions let me know.
Brian

buscadordecaratu July 31st, 2011 10:47 AM

Problem with printing
 
Sorry for my bad iglesista am translating with google, the problem I have is that I'm building Printer shirts with the R1900, I've installed it, now I'm trying to print, but the impression I get tripled from the car not done twice in the same place, do not you should do if I have to align head or has no solution

EVLIND August 12th, 2011 06:54 PM

Re: Problem with printing
 
Quote:

Originally Posted by buscadordecaratu (Post 954952)
Sorry for my bad iglesista am translating with google, the problem I have is that I'm building Printer shirts with the R1900, I've installed it, now I'm trying to print, but the impression I get tripled from the car not done twice in the same place, do not you should do if I have to align head or has no solution


See if you can translate again so we can try and help. Or you can put this in your language and I can try and translate with something besides google translate.

Thanks


All times are GMT -8. The time now is 06:10 PM.

vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright 2004-2014 T-ShirtForums.com. All rights reserved.