lalo_mx

Hi everyone.

Im new to the forum. I bought a creation pcut cr-630. Since i am still learning how to use a cutting plotter i had some problems but however everything goes fine once i test materials, speed, force, etc.

What i would really like is to use this plotter in my mac because its the platform where i do everything. I tried signcut with no luck.

I ve read some threads and looks that some users are sucessfully using this machine in mac os x. So im asking for help on how to do it, where i can find drivers, proper software, etc.

Thanx in advance

 

Reply With Quote

BraitosTees

I use this exact same cutter with sign cut and illustrator. Here is a link to where you can get the driver needed to make this work.

http://support.uscutter.com/index.php?_m=downloads&_a=viewdownload&downloadite mid=27&nav=0,5

This needs to be a licensed version of sign cut with the dongle for this to work. And it works best directly with illustrator.

Also have flexi sign pro but i seem to have problems with that so i switched to sign cut since illustrator is the industry standard for vector

 

Reply With Quote

lalo_mx

Quote: Originally Posted by BraitosTees I use this exact same cutter with sign cut and illustrator. Here is a link to where you can get the driver needed to make this work. http://support.uscutter.com/index.php?_m=downloads&_a=viewdownload&downloadite mid=27&nav=0,5 This needs to be a licensed version of sign cut with the dongle for this to work. And it works best directly with illustrator. Also have flexi sign pro but i seem to have problems with that so i switched to sign cut since illustrator is the industry standard for vector

Thanx for your fast answer!!!

I just tried it but a get an error message cnql1213_classicnotseize.kext did not installed correctly. Im running snow leopard

I ve got another mac with tiger using ppc processor and it does install it but signcut its not showing the proper port, u know, the dev/cu stuff

Is it absolutely neccesarry to use the dongle version???

Thanx

 

Reply With Quote

lalo_mx

Hi again. It looks that de ftdi chip driver wont work in my case because my CR-630 uses an atmel chip. It also uses pure usb to usb interface, its not using any kind of serial adaptors.

So, i suppose i need de proper usb driver. My mac is recognizing the hardware as an usb modem or usb communication device.

Please, i need help!!! Thanx

 

Reply With Quote

DreamCatcher

I am also running snow leopard. I have the CT630 and cannot get it to register at all. I have signcut x2 for 3 months. I dont have the dongle. I have installed the driver recommended here. I have tried usb - usb and serial to usb and neither does anything. What am I doing wrong?

 

Reply With Quote