Need to Register?

aplusbowling · September 30th, 2009

What type of transfer tape will lift the Poly-Twill from it's backing? I've got a few rolls of Poly-Twill and would like to make some shirts like pimpashirt.com did with Poly-Twill and Vinyl Edging to hold it in place. I have some transfer tape called Magic Mask, but it will not pull the Poly-Twill from its backing. Seems that the Magic Mask is not sticky enough. Any recommendations?

rcorey · September 30th, 2009

The magic mask you have may work if you squeegee it in place and work the backing away from the twill by pulling it back at a sharp angle to the twill. I have never gotten it to pull off easily but I think that is a trade off for having consistent cutting.

JoshEllsworth · October 2nd, 2009

Try the stretchprint mask, use a squeegee, then flip the masked design over and pull away the twill backing and let gravity help you

Will definitely work.

aplusbowling · October 2nd, 2009

Thanks Josh! Just ordered some Stretchprint to give it a try.

BTW, after completing my order it said I would receive an email confirmation. There was no place to enter my email during the order process.....

JoshEllsworth · October 2nd, 2009

Quote:

Originally Posted by aplusbowling


	Thanks Josh! Just ordered some Stretchprint to give it a try. BTW, after completing my order it said I would receive an email confirmation. There was no place to enter my email during the order process.....

Looking into it right now.....thanks

Need to Register?

Resources

T-Shirt Sites

PS Poly-Twill not lifting from backing with transfer tape