Discuss the various aspects of heat pressed vinyl transfers. Popular and new types of vinyl media, suppliers, vinyl cutters /plotters, press times, quality, how to instructions and more can be found in this heat press sub forum.
HELLO,
i HAVE A ROLAND VP540 .. BOUGHT IT BACK IN MARCH OF THIS YEAR. WE CLEAN ALL THE TIME LIKE THE MANUAL SAYS TOO. TODAY WE GOT AN "SERVICE CALL 0140" I DONT THINK WE NEED TO HAVE THE YEARLY CLEANING BY A TECH JUST YET. ALTHOUGH OUR ROLAND IS IN THE WAREHOUSE AND A BIT COLD IN THERE. DOES ANYONE THINK IT WAS TOO COLD FOR THE ROLAND..ANYBODY EVER HAD THIS ERROR BEFORE IF SO WHAT TO DO? HELP
Hello there,
I also have a Roland VP540 I. I bought it just about six months ago. Iam getting an error code 0103.
Can somebody help me how to fix it? Can Someone send me the service manual?
Hello there,
I also have a Roland VP540 I. I bought it just about six months ago. Iam getting an error code 0103.
Can somebody help me how to fix it? Can Someone send me the service manual?
Thanks again,
The problem is, the Roland dealer here is not competent enough.They came and opened the machine but could not solve the problem, that is why Iam also looking for the service manual, may be I can study it and repair myself.
Thanks again,
The problem is, the Roland dealer here is not competent enough.They came and opened the machine but could not solve the problem, that is why Iam also looking for the service manual, may be I can study it and repair myself.
In that case the only advice I can give you is to bypass the dealer and call Roland directly and talk to one of their techs.
Hope this helps.
__________________ Full service graphics design, digital vinyl, dtg, dyesub, embroidery www.iyfgraphics.com
Thus far we have always been able to fix ours by turning the power switch(on the back of the machine)off for a few minutes.
Was actually told to do that by a Roland tech. They said static can get built up on the board and cause issues.
Hello,
This is what part ofthe service manual from Roland says. In order to enter service mode do the followings.
1.Turn main power on.
2. Turn sub power off.
3. Press the following keys in order, down,right, left, up, right, down and left.
3. Within 5 seconds press the left, right and down keys while turning on the sub power.
4. If done correctly the unit will turn on and the front panel will display service mode.
The problem is I have been on the machine for more than three hours but I can not enter the service mode. My sub power is not staying off. The moment I switch on the main power the machine restarts itself and enter into cleaning mode and then back to service call 0103.
If you press the sub power button to put it off the moment you remove your hands it restarts itself. Is there any explanation which makes sense? Iam really frustrated now.
Last edited by JUMAMDOE; November 8th, 2010 at 06:32 AM.
Reason: spelling mistake.
This is a discussion about Roland versacamm vp540 service call 0140 that was posted in the Vinyl Cutters (Plotters) and Transfers section of the forums.
Roland versacamm vp540 service call 0140 
