| T-Shirt Lover T-Shirt Fan
You can call me: Andy
Member Since: Oct 2008
Posts: 20
Thanks: 1
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s) Tagged: 0 Thread(s)
|  Re: I`m in Tears :( Creation CR630 vinyl cutter Error: LoadLibrary PcutLib.DLL
Well ray, the drivers you sent me worked!!.... sort of...
Followed the steps, but I think there's something not quite right in the cutter profile... for ever cut it makes it starts from the origin (pen up), moves to the start of the letter, moves back to the origin, then puts the pen down (at the origin) and moves to the start of the letter, cuts the letter then moves back to the origin, and then pen up.
Any ideas? I've looked at the profile file (creation-pcut.csm) but without knowing what each variable is I'm stumped.
We're nearly there... I can feel it! It must be so simple the solution now... at least flexi is talking to the cutter!
----------
Here's the part of the csm file specific to this cutter. Any ideas?...
[CR-630]
01:$9600,n,8,1,$
02:$0,18,$
03:$262,2147746852,33,1,201326592,$ //262
04:$2113994753,20,10,1024,$
05:$36/1800.0,$
06:$36,1800.0,0,0,0,0,$
07:$CR-630$
- //cutting
08:$CreationPCut.dll$
09:$1016.0,0,0,0,8388807,$
10:$OH;$
11:$$
12:$IN;PA;$
13:$SP0;$
14:$PU%ld,%ld;$
15:$$
16:$$
17:$$
18:$$
19:$$
20:$PD%ld,%ld;$
21:$PU%ld,%ld;$
22:$PU;$
23:$PD;$
24:$$
25:$$
26:$$
27:$$
28:$$
29:$$
30:$$
31:$$
32:$$
33:$$
- //engraving
- //printing
300:$SA-PCutUSB,Fil$
- //custom head
= {SP(0,Knife,1,5,1,0,1,0,);}{VS(0,Speed level,1,9,1,0,1,0,);}{FS(0,Force level,1,9,1,0,1,0,);}{AC(0,Acceleration Level,1,9,1,0,1,0,);}
Set 1=(0,1,1)(0,1,5)(0,1,6)(0,1,4)
- //custom end
- //macro
- //comment
Last edited by andyiw; October 20th, 2008 at 09:08 AM.
Reason: Adding the profile info.
|
