Need to Register?

cervantez · June 1st, 2008

need to finish job to ship tommorow
chewed up strip bad caan not weed any ideas

mystysue · June 1st, 2008

what brand and were are you located.. that would help us come up with ideas

cervantez · June 1st, 2008

roland gx 24 just put sone tape over cut up section of strip works but ill never be caught without a spare. got weeding done now to press fold and box. thanks sorry for being so vague was freaked first order and thought i blew it

COEDS · June 2nd, 2008

Thanks For The Tip And Sharing Your Advice.glad All Worked Out For You. ..... Jb

MotoskinGraphix · June 2nd, 2008

I cut a vinyl strip and taped it over my cutting strip.

Rickster58 · June 8th, 2008

If you have the type of cutting strip that is just a teflon strip held on with double-sided tape, you can reuse it. Pull it off like you're going to replace it. Remove any burrs that you made in the cutting side of the strip. Then use your thumb to roll the double-sided tape off of the back. Then take some new double-sided tape, banner hem tape will work, and put new tape on the side that is destroyed or worn and re-install it.
Rick<><

COEDS · June 8th, 2008

Thanks for the tip Rick.That is a great idea, I just wrote that one down in my emergency shop book. ..... JB

cervantez · June 8th, 2008

thank all of you for your help. this place rocks.
the order got shipped they loved it, again thanks for all your great info

Robin · June 8th, 2008

some great ideas here in a pinch thanks!!

Need to Register?

Resources

T-Shirt Sites

just killed cutting strip help