janeystar

Hi, i am a complete novice and want to make my own bodyart stencils for airbrushing. i'm looking at a dragon pro 50" DP1260NX on UK ebay, can anybody give me advice if the machine is ok or should i go for a more expensive branded machine.

 

Reply With Quote

COEDS

Hello Jane, I suggest you look around for some feedback both on ebay and from fellow members on the forums from the UK. I'm not sure your main purpose for the cutter is, but most of us use 24 inch cutters. Heat press vinyl is normally 15-20 inches in width. .... JB

__________________
RIP: 1964 - 2008

 

Reply With Quote

Progeny

If it's just for bodyart stencils, work out what the largest stencil you will ever do and get the appropriate size cutter, you might be able to manage with a smaller hobby machine. If you go for the above machine, i've never heard of it but alot of these are re-branded machines anyway, like JB says check it out before you buy and ask if there is any backup/spares available.

Lee

__________________
trying to help, sometimes i don't!

 

Reply With Quote