Discuss the various aspects of heat pressed vinyl transfers. Popular and new types of vinyl media, suppliers, vinyl cutters /plotters, press times, quality, how to instructions and more can be found in this heat press sub forum.
i saw an advert on ebay for a creation pcut 24 . Is this a good vinyl cutter to buy?
i am new to the business.
has any one used it and would they recommend it?
i know the roland gx24 is good but i cant afford that right now.
pls help
its on ebay for 180 ppounds.
is this a good price?
i havent bid yet.
i have 3 hrs to end of bid so any advice now would be helpful!!! #
thanks xx
__________________
In the Kingdom of the blind.The one eyed man is the king.
I moved this question to the vinyl cutter section of the forum where it should get more response.
I did a quick search of the forums for: creation p cut using the search box at the top and I found that it's made by uscutter and that it seems to be a good vinyl cutter to consider. You can read lots of reviews/opinions on the cutter by doing the same search.
Contour cut means to cut around a printer picture, saving you the trouble of doing it by hand. If you are new to this, you will most likely not need it. I believe that contour cutting is not really needed, especially if you are looking at an inexpensive machine. The roland has it, but they are also using printers that can utilize the higher quality ink. You don't want to use a home printer and contour cut cheap heat transfer that will not last, just my opinion.
Buy the pcut, it is a really good machine, at least in my limited experience. Not a big investment either. Start out with it, and if you do really well, then save and re invest into a more expensive machine.
Creation P-Cut cuters are not made by USCutter they are made by Creation in Shenzhen China. The CS, CB and CTO models can contour cut (optional on CTO)
Creation P Cut vinyl cutter any good? 
