Need to Register?

welsy · February 7th, 2009

Has anyone seen or used the new YUDU machine by Provocraft? I saw it at Jo-ans today while buying fabric paints. I decided to give it a go!

I hope it works as well as it appears to on the box, it gives me the chance to try out designs at home (once I figure it all out) LOL

veedub3 · February 7th, 2009

Here is the thread where it was discussed.

ALL IN ONE ?!? coater - burner - screen dryer - platen !?!

Katrina

theprintshop · February 8th, 2009

Just be a bit careful of new comers - I would feel more comfortable dealing with an established brand or manufacturer - someone who has a reputation and good feedback

equipmentzone1 · February 8th, 2009

I googled the machine -- you can see pictures and a video of it in action here. Looks like a fun little machine. A very creative design. My only question is how you dry the shirts.

This is an extremely expensive process, though, for anyone more than a hobbyist. Two sheets of emulsion for $20? Ouch. I hope you have fun, but if you're looking to start up a little business, you might check out another option.

-Alex

welsy · February 9th, 2009

I wanted to buy a small screen print set up, but it looked like I'd need a small room or garage just to fit it all in....? Maybe thats not the case.

I still havent tried the machine yet, but have been using lots of coupons to get the supplies 40-50% off at Jo-ans LOL

The platens have hangers, it suggests 30 mins dry time, then you have to iron each item back & front for 3-4 mins!! Not fast or cost effective for large runs, but I hope it allows me to have fun with my designs.

Dumb questions again from the beginner :-)

The screens say 110 mesh, with their paperwork & DVD it says other inks & paints with ruin the mesh. YUDU ink is water based, so I'm thinking if I use other water based products it shouldnt ruin the screen....?

I'm going to the Orlando show, so hope to find some good suppliers there :-)

equipmentzone1 · February 9th, 2009

Thanks for the info on the drying times.

"Other inks will ruin the mesh" sounds like a good way for them to sell their inks. I would be very surprised if a water-based screen printing ink caused a problem. (But don't hold me to that LOL.) You will probably need to adjust your drying times depending on which ink you're using.

-Alex

ashamutt · March 4th, 2009

here is a great place to ask all of your "YUDU" questions.......
YuduForums • Index page

bigmama · March 13th, 2009

acMoore had a 50% off coupon in sunday paper for 3/11-3/14 i used the coupon on 3/11 for the yudu machine cost $150 + tax .....the coupon did not exclude yudu ..

Need to Register?

Resources

T-Shirt Sites

The new Yudu machine!