buy4now1

Hi
I recently purchased an Epson C120 printer as an extra. For some reason, when I try and print a transparency, the printer just shoots it about 3/4 thru without printing and then paper jams. Are there certain settings I need to use this printer? Thanks

 

Reply With Quote

AaronM

__________________
Aaron Montgomery - Sales Manager - U.S. Screen Print & Inkjet Technology
www.screenprinters.net www.MyT-Jet.com - T-Jet is a registered trademark

 

Reply With Quote

zo76

I have the same printer and what i do to print my transparencies is tape a regular sheet of paper behind the film. I cut off a little bit of the paper from the sides and one of the ends so that the paper wont hang off the sides because its really hard to tape the paper exactly on the film. Also use removable double sided tape.

 

Reply With Quote

buy4now1

Quote: Originally Posted by zo76 I have the same printer and what i do to print my transparencies is tape a regular sheet of paper behind the film. I cut off a little bit of the paper from the sides and one of the ends so that the paper wont hang off the sides because its really hard to tape the paper exactly on the film. Also use removable double sided tape.

I will try that as soon as i get a new cartridge. I ran out of magenta and replaced it with a generac one and now the printer won't work until I either get a chip setter or a new epson cartridge. Thanks again for the tip

 

Reply With Quote