Bauds

does any one have plans for a squeegee sharpener?
I should really sharpen the ones I have, some have nicks.
any info would be great, I am on a limited budget, and a do it your self kind of guy.
Thanks,
Bauds

 

Reply With Quote

gerry

I have a flat sturdy board about the length of a large squeegee.
Here is what I did, laid out sandpaper to cover a strip about 3" x the length of the board..laid out in the center. I then screwed 2 pieces of wood an inch thick like a railroad track that keeps the squeegee in between the rails as it glides over the sandpaper, when I replace the sndpaper I just unscrew the wood off the plank and replace the strip of paper.

Hope that makes sense as I am very bad at explaining things w/o the use of my hands.
I thing I used a fairly course sandpaper..not so course that it eats the rubber..maybe 220 grit.

That may not deal with the nicks though.

 

Reply With Quote

Bauds

Thanks!
That is probably the rout I'll go.
You've really been helpful.

 

Reply With Quote