Need to Register?

BrianTruong · October 4th, 2009

I want to put tape washers under my screens so I have a good off contact, but I only have 23x31 screens. So at least the width of my platen has to be 22 inches so the screen can lay on the screen with the taped washers, but I want to print on s-xl tshirts, and the small has a width of 18 inches and medium has a 2o inch, so the shirts probably won't fit on the platen. Does anybody have any suggestions, or have dealt with this issue?

pdpatch · October 5th, 2009

Instead of using the washer on the sides try the end closest to you.

ezilla · October 5th, 2009

Tape a paint mixing stick to the end closest to you so it rests on the platen. It has worked for me in the past.

13Graphics · October 5th, 2009

As the others said put it on the end closest to you. Hopefully you made a platen with a neck for it to rest on.

MotoskinGraphix · October 5th, 2009

Get smaller screens.

Need to Register?

Resources

T-Shirt Sites

Problem with building a platen