GFenty

Say I had a Plastisol Transfer, is a heat press the definitive method of transfering this design?

Could I substitute one for an iron?

I want the finish which the Plastisol gives, as iron on transfers are slightly too blocky

So sorry for being such a newbie, and btw, this forum is brilliant...

 

Reply With Quote

phillip1906

Yes. A heat press is what you have to use. An iron will not give you the heat and pressure required of plastisol transfers.

You should do some research on these types of transfers and what is required of them. To do that, you've come to the right place. This forum has tons of information for you to review. Use the search feature to help you narrow down the results to exactly what you're looking for.

Good luck!!!

 

Reply With Quote

GFenty

Quote: Originally Posted by phillip1906 Yes. A heat press is what you have to use. An iron will not give you the heat and pressure required of plastisol transfers. You should do some research on these types of transfers and what is required of them. To do that, you've come to the right place. This forum has tons of information for you to review. Use the search feature to help you narrow down the results to exactly what you're looking for. Good luck!!!

thankyou, very much

 

Reply With Quote