Auditor Clothing

Quote: Originally Posted by MotoskinGraphix Here is a pic of my first try with speedball water based white on a blk tee. I think my screen mesh is a bit high for this design. I am using a 22x24 alum. frame with 230 mesh. Really the only pro-frame I have. I also think my design was a bit large for the actual screen. My first pull would lay nice down the center of the image but the edges would feather away. I have no squeegie tech. at all as I am just figuring this all out. This screen was made with the Ulano film cut on the pltter, weeded and applied to the screen. The actual print is solid whate compared to the pic. It is way solid kinda like a cold peel opaque plastisol transfer. It actually compares to vinyl applications and isnt the feel I am after. Any advice or tips post them please.

Either your image is too big or you don't have a big enough squeegee. Either way first stroke you want to flood second stroke you want to clear.


That is a pretty cool design and if that's your first print ever (white being the hardest for beginners) you'll have no problem.

__________________
Auditor Clothing
www.AuditorClothing.com

 

Reply With Quote