 Re: ImageClip procedure
Here is round two. There are two things going on here. (1) The adhesive is still not sticking to the toner in some areas and (2) there seems to be a feed roller track right in the middle, almost like a feed roller rolled through wet ink. I pressed this one at 215/10 but I preheated the lower platen for about 5 seconds hoping that would buy me some peel time in case that was an issue.
I think I have a toner problem. I did another print that came out of the printer very light. I pressed it and hardly any adhesive stuck to the toner. I think there has to be a quite a bit of toner there for the adhesive to stick. There must be a reaction between the adhesive and the toner and when the toner is light, the adhesive doesn't transfer.
I have the printer driver set to heavy paper. I'm going to try setting the printer itself through it's menu system to heavy. Other than that, I don't see any other way to get more toner down on the paper and if I did would it just make a "wet ink" mess.
I was under the impression that the Oki printer was on the top of the list as far as printing ImageClip. I hope it's just a simple setting that I've overlooked. |