dragontees1

i printed a white plastiol ink transfer on transfer paper. I also used adesive powder and ran it through the drier.When i used the heat press most of the image came off the transfer paper and the image wasnt as dark like it should of been. what stayed on the paper was a very small amount of ink. What am i doing wrong?

 

Reply With Quote

wormil

Transfers do require some trial and error although it sounds like you did very well for your first print. You may have better luck asking in the screenprinting forum since very few here actually print transfers.

__________________

 

Reply With Quote

dragontees1

thanks for your input.

 

Reply With Quote

thutch15

Did you use a hot split or a cold peel paper?

 

Reply With Quote

dragontees1

i used a hot peel at 390%

 

Reply With Quote

thutch15

I just did my first one that I had printed and I only used 360 degrees, you might just cut one transfer up and adjust press and temp for the different peices.

 

Reply With Quote