jerzyson

I am looking to purchase a vinyl cutter I understand what they do but can't afford the GX24 so I was looking at the SV-12 does anyone have any feed back for me should I purchase it or keep saving.

 

Reply With Quote

lost1

Keep saving. Watch for a used 24" cutter.

__________________
www.511signs.com
www.poconobear.com

 

Reply With Quote

jake_s

lost1 is right, hold out for a 24' cutter, you will be alot happier. i use a USCUTTER 24" and it works fine.

 

Reply With Quote

badalou

Check out the copam 2500 for about $600. It is used a lot by members here and they seem to like it. You can get it off ebay (One of the few product I would buy from Ebay)

__________________
There is a center to everything.. I found mine at..
www.heatpressessentials.com Tools to get the job done! www.tbiz101.com (New)Heat Transfer Education

 

Reply With Quote

guest3300

You can get a 24" pcut on ebay for about $170. You should be able to make enough money off of it to buy the next one up and go from there.

A word of caution. A fair number of the plotter sales on ebay are scams. They are getting pretty good at stopping them but keep your eyes open on these. Also, My guess is there is a lot of shilling going on as I see the same plotters relisted quite often. We have been looking at these for a year and at least 25% of the ones we looked at were relisted. A red flag as far as I am concerned.

Check out Craigs List. There are some real gems in there.

 

Reply With Quote

ino

Just buy yourself a craft robo pro a solid machine built by professional men that know what its all about.

 

Reply With Quote