prometheus

Glad we could be of help. When you get something done, post a pict so everyone can see.

__________________
The original Thread Killah!™ www.deathisgain.com also "Thread Bully" and the all new "Thread Hijacker"! Soon to be WINNER!

 

Reply With Quote

wtwb1595

seriously? ok. would i post it in this thread or post a new one? it will be about two weeks. i am really excited now, i already have buyers for these shirts and was freaking out that i couldn't pull them off. thanks again!!

 

Reply With Quote

prometheus

Quote: Originally Posted by wtwb1595 seriously? ok. would i post it in this thread or post a new one? it will be about two weeks. i am really excited now, i already have buyers for these shirts and was freaking out that i couldn't pull them off. thanks again!!

Post to this thread. It's always great to see peoples results with what we have been talking about.

__________________
The original Thread Killah!™ www.deathisgain.com also "Thread Bully" and the all new "Thread Hijacker"! Soon to be WINNER!

 

Reply With Quote

wtwb1595

ok i'm back! i've got my plastisol transfers and they look fabulous. so now i am back to square one. i've been pressing some tests and ugh. i've got a whole range of outcomes. so i need some helpful insight as to what might be my problem.

i'm getting transfers that go down but some edges are lifting.....then i get some that are half stuck to the paper, half to the garment. ......then i will get a perfect transfer, celebrate and try a second and i'm back to lifting edges.

any ideas?

 

Reply With Quote

badalou

Quote: Originally Posted by wtwb1595 ok i'm back! I've got my plastisol transfers and they look fabulous. so now i am back to square one. I've been pressing some tests and ugh. I've got a whole range of outcomes. so i need some helpful insight as to what might be my problem. I'm getting transfers that go down but some edges are lifting.....then i get some that are half stuck to the paper, half to the garment. ......then i will get a perfect transfer, celebrate and try a second and I'm back to lifting edges. any ideas?

Chill out.. help is here..
OK. number one.. are you pre pressing shirts????
Number 2.. make sure that when pressing there are no ridges or seams from the tee shirt in the way of the press lay flat on the surface of the tee. This will cause the problem you describe. If you have a problem where you can't remove the seams away from the design then get yourself a large mouse pad (office Depot) and place it directly under the shirt where the design goes. this will bring the design up and leave the seams below. (I showed this in one of my 21 videos) Let me know if this is the answer. Lou

__________________
There is a center to everything.. I found mine at..
www.heatpressessentials.com TEE SQUARE IT, LOGO IT! TEE PAD IT! www.heatpresstransfernetwork.comHeat Transfer Education

 

Reply With Quote