Discuss the various aspects of heat press technology. Transfer paper, inks, plastisol transfers, vinyl cutters, printers, commercial usage, durability, suppliers, etc.
Hi all! Been stalking for a while but first time poster,so go easy on me.
I popped on my generic 15x15, ebay heat press today thinking ima hook up some tee's. Few minutes later I notice that temp won't rise. I thought it was the fuse so fooled with all that. LED display is on so its not the fuse. Does anyone know what may be the problem? Anyone had similar problems.
P.s. typed all this from a droid so excuse blockyness.
Ok the only thing that should keep it from heating up, aside from making sure it is turned on, I would think would be a heating element is not working correctly. Is there any other switch that is seperate from the display for the power to the heat press itself?
__________________
Always do right; this will gratify some people and astonish the rest. ~~~Mark Twain BobbieLee
It sounds like it could the heating element then. I would call the distributor on monday and ask them if there is anything you can do, or ask for a replacement press. It should heat right up after plugging in and setting the temp, and turning it on.
__________________
Always do right; this will gratify some people and astonish the rest. ~~~Mark Twain BobbieLee
Yes temp was set correctly and time was given to reach set temp. I've used it plenty of times before, just this time it didn't get hot. Its not a raggedy old machine, had it about 5-6 months.
Heat press help 
Re: Heat press help 
