It's possible use diferent C-board from another machine for T-jet3. Belquette - print engine is R1800
Veloci-jet - print engine R1900.
I used allready 2 C-boards coast $ 1200
Thank you Larry
Not 100% sure of this answer... but at one point Belquette was looking at offering a solution for T-Jet 3 owners. From what I heard, it entailed more than just switching out the boards and they decided to go a different direction. So stating that, I would expect the code to be different from one printer to another and it would not work. But maybe will know for sure.
I don't think your logic is correct. The control board sends the code based on the way the engineer design the equipment. You are assuming that the company US Screen hired to create that board did everything exactly the same as Belquette. There is a chance that this is so, but it is not that good. Why not send Belquette an email or PM and see what they have to say? I am sure that everyone that owns a T-Jet 3 would love to know this as well.
BELQUTTE using
The same ink, the same epson board, the same print head, R 1800 have the same print size 13#18.
Which means the system is the same.
Larry, If this were true, You wouldn't be paying 1200 for a circut board, and USSPit would probably still be in business. Same head, Head transport, some electronic and mechanical components. Some, not all.
__________________ imprimeo! ....Digitizing, DTG and Embroidery..FREE Embroidery SOFTWARE Sierra Consultant, Stitch ERA Universal Dealer, Digitizing trainer for GUNOLD USA
BELQUTTE using
The same ink, the same epson board, the same print head, R 1800 have the same print size 13#18.
Which means the system is the same.
If this were true, Equipment Zone would have a solution for you since they have been instrumental picking up support when US Screen went out. And as far as I know, currently, Equipment Zone does not have a solution for the C-Board for a TJet3.
__________________
BelQuette Inc, 877.202.0886 & Screener's Choice, 330-345-5877
Mod1 Direct to Garment Printer, Made in the USA www.belquette.com
Unfortunately, there is no current replacement for the T-Jet 3 C-Board. Please keep in mind that each manufacturer makes their own proprietary control boards for their printers. These boards also hook up to whatever control panel that manufacturer makes to control that printer. So while a T-Jet 3 might use the same head assembly as a Belquette or DTG printer based on similar Epson models, everything on their control boards and control panels would be wired very differently. So you will not be able to interchange other manufacturers boards. The original manufacturer that US Screen used for the T-Jet 3 is no longer in business so there is no way to get the C-Boards since they were the ones who designed and made them. That situation is only for the T-Jet 3. We have no problems supplying any part for the other T-jet models.
Diferente C-BOARD 
